Cybertake S2 Pro | Best Portable Air Conditioner for Camping & Campers

The CYBERTAKE S2 Pro, with a cooling capacity of 5,100 BTU, can typically cool a small room or an area of approximately 10 to 12 cubic meters. However, the effective cooling area may vary depending on factors such as ceiling height, insulation quality, local climate, and the number of windows and doors in the space.

The CYBERTAKE S2 Pro operates within a power range of 110-600W, depending on the power source:

• 12V car charger: 110-120W
• 24V car charger: 110-240W
• 12/24/48V battery: 110-600W

This flexibility ensures compatibility with various power sources for different scenarios.

The CYBERTAKE S2 Pro measures18.9 x 10.3 x 14.1 inchesand weighs26.5 lbs (12 kg), making it compact and portable for various outdoor scenarios.

The CYBERTAKE S2 Pro heater is designed to operate with a minimum temperature of 10°C. Operating it below 5°C may cause the evaporator to ice up, which will trigger the unit's protective mechanism and cause it to stop functioning. For optimal performance and to avoid potential issues, it is recommended to use the heater within the specified temperature range.

The CYBERTAKE S2 Pro uses R290 refrigerant, an eco-friendly and efficient choice designed to provide effective cooling while minimising environmental impact.

The CYBERTAKE S2 Pro uses a dual-hose venting heat system to transfer heat from the interior to the exterior. This process operates on the same principle as the S1 Pro.

• One hose, located at the top of the tail section, draws in outside air.
• This air flows through the condenser, where it absorbs heat.
• The heat is then expelled outside through another hose at the tail section.

This efficient system ensures effective cooling while maintaining optimal performance.

The S2 Pro features an upgraded Drain-Free Function, utilising a dense point-based (96+22) condensate irrigation system, which eliminates the need for manual drainage under normal conditions.

In high-humidity and high-temperature environments, a drain pipe can be connected to assist in faster drainage. Additionally, this system helps conserve energy, saving up to 40-50W of power consumption during operation.

In ECO+ mode, the power consumption is approximately 100W, allowing 1 kilowatt-hour of electricity to last up to 10 hours.

In MAX cooling mode, 1 kilowatt-hour lasts around 2 hours.
In MAX heating mode, 1 kilowatt-hour lasts about 1.5 hours.

Please note that actual duration may vary depending on environmental conditions and usage scenarios.

When deciding between the S1 Pro and the S2 Pro, consider the following differences to choose the best option for your needs:

• Cooling & Heating: The S2 Pro offers both cooling and heating, making it a versatile option for year-round comfort. The S1 Pro is strictly a cooling model.
• Weight: The S1 Pro is lighter at 9.8kg, making it easier to carry and transport. The S2 Pro weighs 11.6kg due to its added features.
• Price: The S1 Pro is more affordable, offering a budget-friendly option for cooling needs. The S2 Pro is priced higher but offers additional features like heating and more powerful performance.
• Cooling Capacity: The S2 Pro has a higher cooling capacity of 5,100 BTU, ideal for larger or more demanding spaces. The S1 Pro offers 3,300 BTU, suitable for smaller areas.
• App Function: The S2 Pro comes with app functionality, allowing you to control the device remotely for added convenience. The S1 Pro does not have this feature.

Choose the S2 Pro if you need both heating and cooling, have a larger area to cool, or prefer the convenience of app control. Opt for the S1 Pro if you're looking for a lightweight, affordable cooling solution for smaller spaces.

Visit How to Choose

Durable Protection: The storage bag is made from tough, weather-resistant material, ensuring your Cybertake Air Conditioner is safe from the elements.

• Perfect Fit: Specifically designed for the Cybertake S1 Pro, the bag ensures a snug fit, minimising movement and preventing damage during transport.
• Organised Storage: Keep everything in one place – the bag has compartments to hold not just the air conditioner, but also all your essential accessories.
• Compact & Portable: Lightweight and easy to carry, making transportation and storage hassle-free.
• Preserve Longevity: Helps keep your unit in top condition by protecting it from dirt, dust, and potential damage, extending the lifespan of your air conditioner.
• Convenient Travel: Whether you're on a road trip, camping, or moving it between locations, the storage bag makes travel more efficient and safe for your equipment.
  

Yes, you absolutely can! However, because our units are engineered with a high-efficiency 48V native architecture (to provide maximum cooling with minimum power draw), you have two main ways to connect it to your 12V setup:

Option 1: The "Direct DC" Method (Recommended for Off-Grid)

The most efficient way is to use our Smart 12V/24V to 48V DC Booster.

• How it works: It plugs directly into your 12V Lithium or AGM battery and "boosts" the voltage to 48V.
• The Benefit: This is roughly 20-25% more efficient than using an inverter. It avoids the "energy tax" of converting power back and forth, meaning your battery will last significantly longer through the night.

Option 2: The Inverter Method

You can plug the Cybertake’s standard AC power adapter into an Inverter (minimum 2000W recommended).

• How it works: The inverter turns your 12V battery power into 240V, and the Cybertake power brick handles the rest.
• The Benefit: It’s "Plug and Play" if you already have a large inverter built into your canopy or caravan.
• Downside is that plugging into a 240V inverter usually draws more power. You lose energy during the conversion from 12V DC (battery) → 240V AC (inverter) → and back down to 48V (to run the unit). Going direct-DC saves that "conversion tax."

How long will it last?

On a typical 100Ah Lithium battery, you can expect:

• Max Cooling Mode: ~2.5 to 3 hours of continuous high-power cooling.
• Eco Mode: ~ 6 to 8+ hours (perfect for a full night’s sleep once the initial cabin temperature has dropped).

Pro Tip: For the best performance, we recommend a 200Ah Lithium battery or larger if you plan to run the unit all night in high-humidity areas like Far North Queensland, or take a portable power station with you.

Our units aim to drop the temperature by 10-12°C from the ambient air. In a 40°C tent, the unit will likely bring the air down to a comfortable 28°C. This is a massive difference in "feel" and comfort!

Park in the shade, keep your hoses short/straight, and use reflective thermal covers on your tent or caravan windows.

Dedicated battery packs are typically designed to power a single device only, which limits flexibility. Instead, Cybertake focuses on compatibility with a wide range of power solutions so users can run multiple devices from one system, including fridges, lighting, and other essentials.

Battery runtime depends on capacity and usage mode. As a general guide:

• ECO+ Sleep Mode can consume as little as ~10 amps per hour in 12V with 48V Smart Booster
  
• MAX mode may draw around ~40 amps per hour in 12V with 48V Smart Booster
  

For example, a 200Ah battery setup can typically support overnight cooling when used efficiently alongside other essential devices.

Cybertake units are designed specifically for off-grid use and can be powered by battery systems and solar setups. With the right configuration, it is possible to run the unit overnight without needing a generator.