Which Cybertake Is Right for Your Setup?
From swags and rooftop tents to family tents and camper trailers,
find the Cybertake portable air conditioner that best suits your
space, cooling needs and off-grid setup.
Your Setup
Recommended Model
Why
Swag
Maximum recommended space: 6–8 m³
S1 Pro 3300 BTU
Lightweight and efficient cooling for very small sleeping spaces.
The S1 Pro is designed for compact areas with a maximum recommended
space of approximately 6–8 m³.
2–3 Person Tent
Maximum recommended space: 6–8 m³
S1 Pro 3300 BTU
S1 Pro 4100 BTU
Both S1 Pro models are designed for compact camping spaces up to
approximately 6–8 m³. Choose 3300 BTU for smaller spaces and
maximum efficiency, or 4100 BTU when additional cooling capacity
is preferred.
Rooftop Tent
Maximum recommended space: 6–8 m³
S1 Pro 3300 BTU
S1 Pro 4100 BTU
The S1 Pro is our lightweight choice for rooftop tents within
the recommended 6–8 m³ maximum space. Select 3300 BTU for smaller
rooftop tents or 4100 BTU when additional cooling performance
is preferred.
Large Family Tent
Maximum recommended space: 10–12 m³
S2 Pro Cooling Only
S2 Pro Cooling & Heating
The S2 Pro provides 5100 BTU of cooling capacity and is recommended
for enclosed spaces up to approximately 10–12 m³. Choose Cooling
Only for summer adventures or Cooling & Heating for year-round comfort.
Teardrop Camper
Maximum recommended space: 10–12 m³
S2 Pro Cooling Only
S2 Pro Cooling & Heating
The S2 Pro's 5100 BTU capacity is well suited to compact camper
interiors up to approximately 10–12 m³. Choose Cooling & Heating
if you travel throughout both summer and winter.
Pop-Top Camper
Maximum recommended space: 10–12 m³
S2 Pro Cooling Only
S2 Pro Cooling & Heating
Suitable for targeted climate control where the enclosed area is
within approximately 10–12 m³. Canvas, insulation, direct sunlight
and ambient temperature can significantly affect performance.
Camper Trailer
Maximum recommended space: 10–12 m³
S2 Pro Cooling Only
S2 Pro Cooling & Heating
The S2 Pro is designed for compact camper spaces up to approximately
10–12 m³ and can be integrated into compatible off-grid battery
systems for portable climate control.
Large Caravan / Hybrid
Targeted zone only: maximum 10–12 m³
S2 Pro Cooling Only
S2 Pro Cooling & Heating
The S2 Pro is not designed to cool an entire large caravan.
It may be used for targeted climate control where the enclosed
sleeping or living zone itself is within the recommended
10–12 m³ maximum.
Choose Your Cybertake Model
S1 Pro
Maximum recommended space: approximately 6–8 m³.
3300 BTU: Our lightweight and energy-efficient option for swags, rooftop tents and compact camping spaces.
4100 BTU: Increased cooling capacity while retaining the compact S1 Pro format. Ideal when additional cooling performance is preferred within the recommended space.
S2 Pro
Maximum recommended space: approximately 10–12 m³.
Cooling Only: 5100 BTU cooling for larger tents, compact campers and off-grid setups where heating is not required.
Cooling & Heating: 5100 BTU cooling plus 6100 BTU heating for year-round climate control and four-season adventures.
Important: Check the volume of your space before choosing your model.
S1 Pro is recommended for spaces up to approximately 6–8 m³,
while S2 Pro is recommended for spaces up to approximately
10–12 m³. These figures represent the maximum recommended space,
not guaranteed cooling performance. Insulation, direct sunlight,
ambient temperature, humidity and installation can all affect
real-world performance.
For best performance, correctly separate the cool-air intake from
the condenser intake and hot exhaust. Cybertake portable air
conditioners are designed for compact and targeted climate control.
Maintenance and Troubleshooting
| Code | Fault Description | Solution |
| F0 | Water pump malfunction | Disconnect the power supply and restart the air conditioner |
| F1 | Display board communication failure | Disconnect the power supply and restart the air conditioner |
| F2 | Hardware overcurrent protection | Disconnect the power supply and restart the air conditioner |
| F3 | Rear fan feedback fault | Disconnect the power supply and restart the air conditioner |
| F4 | Front fan feedback fault | Disconnect the power supply and restart the air conditioner |
| F5 | Bluetooth communication failure | Disconnect the power supply and restart the air conditioner |
| F6 | Water level sensor malfunction | Disconnect the power supply and restart the air conditioner |
| E0 | Inlet airsensor malfunction | Disconnect the power supply and restart the air conditioner |
| E1 | Evaporator sensor malfunction | Disconnect the power supply and restart the air conditioner |
| E2 | Exhaust sensor malfunction | Disconnect the power supply and restart the air conditioner |
| E3 | Exhaust overheat protection | Disconnect the power supply and restart the air conditioner |
| E4 | Evaporator subcooling protection | Disconnect the power supply and restart the air conditioner |
| E5 | Overvoltage protection | Disconnect the power supply and restart the air conditioner |
| E6 | Undervoltage protection | Disconnect the power supply and restart the air conditioner |
| E7 | Phase-loss protection | Disconnect the power supply and restart the air conditioner |
| E8 | Stall protection | Disconnect the power supply and restart the air conditioner |
| E9 | Phase current anomaly protection | Disconnect the power supply and restart the air conditioner |
| EA | Software overcurrent protection | Disconnect the power supply and restart the air conditioner |